This is about repair / fixing of Panasonic Washing Machine (Model: NA-F75S7) water inlet valve (feeding valve).
Before fixing, this is the video on how the incoming water flow into washing machine. Sometimes even worst than this, at worst case, no water will flow in at all (and even make loud noise).
Let's start the repair / fixing as below:
1) Disconnect the incoming pipe from washing machine
2) Unscrew the 4 screws at both side of washing machine
4) Lift up the cover and unscrew the 4 screws at the black plastic tray (under the top cover)
7) Remove the black rubber from old part to new part
9) Put back the black plastic tray, screw it and then assemble back the top cover.
11) Power ON the washing machine and you will now see the water flow into washing machine at normal condition
10) Reconnect back the spring (right side) and the latch (left side) in order to secure the top cover lid
Note: According to replacement part seller, the OEM parts might have slight misalignment at the 2 connector pins, need to adjust manually in order to allow it to slot into the wiring connector. Thus, I choose to buy the original parts this time.
No comments:
Post a Comment