DIY Series 26: Wall Mounted Foldable Table

 

Wall-mounted foldable table are great space-saving ideas. Mount it at your preferred height at any wall is easy at minimum cost involved.

Just place an order online, according to your own preference. I personally preferred rubber wood type, than the compressed wood with glossy lamination. As for the table size, I choose 100cm length X 40cm width. Most of the foldable table comes with the bracket bundled.

Measure the height that you want to fix the table. Normally between 70cm to 72cm will be comfortable height (depends on individual preference) . This time, I choose 72cm height from the floor.

Get a measuring tape and leveler to help on the measurement and table surface level precisely.

 

During 1st attempt of installation, I pushed the table top to the wall leaving no gap in between. Later, I found out that the foldable table is not able to fold up to 90 degree as the bracket need certain clearance from wall in order to make it folded.

Then, I tried for 2nd attempt. make a clearance of 2cm from wall and rescrew the table top again.

This time, the table top is able to be folded up to 90 degree, which looks better and nicer when folded.

Here is the newly installed wall mounted foldable table.