DIY Series 15 @ MCO: Get Additional Bidet Hose

Turn Your Toilet Water Tap into a Bidet Hose Tap

1) Get ready a set of bidet hose and prepare the necessary tools.

2) Dismantle the existing water tap.

3) You will see a hole on the wall, clean the hole if there is any debris inside.

4) Install the newly purchased bidet hose set and test the water flow.

5) If the bidet hose is too long, you can add a holder at the toilet tank. Else, just hang it at the designated place at the new water tap.

6) There are 2 types of bidet hose tap. I personally tested both and recommend the one on the right. This is because one would have a better control of the valve with a thumb. The hose holder on the left picture functions as a valve and one might accidentally twist and turn it on before getting ready with the aim.